
Consumer unit replacement in Coventry swaps an old fuse box for a modern board with RCD protection. We test your circuits, fit the new unit and certify the work, with a free quote first.
Old rewireable fuses, a wooden backing board, no RCDs, or a board that's damaged, warm or scorched are all signs. So is a unit that can't take an extra circuit for a new kitchen, shower or extension. Some older plastic boards may also be worth upgrading.
An RCD watches for electricity leaking out of a circuit, for example through a person touching a live part. If it detects a leak, it switches off in a fraction of a second. That's why modern boards have them and old fuse boxes don't.
New RCDs are more sensitive than old fuses, so they can reveal faults that were hidden before, such as damaged cable or a faulty appliance. We test the circuits before fitting the new unit, so any problems are found and priced up front.
We look at your current board, the main earth and the wiring connected to it, and test the existing circuits. This tells us the size of unit you need and whether anything else must be fixed first. Then we give you a free quote.
On the day, the power is off while we remove the old board, fit the new consumer unit and connect and label each circuit. We test every circuit, show you how the new unit works and give you a certificate for the work.
Tell us about the leak, fault or project. We aim to respond the same day, and there's no call-out charge.
We look at the job in person and give you a free, no-obligation quote before any work starts.
We finish the job, test everything we have fitted and certify the work before we hand it back to you.
The power is off for most of the job, which usually takes part of a day for a typical home. We'll tell you in advance so you can plan around it. Keep fridge and freezer doors closed, and they'll stay cold while the power is off.
It depends on how many circuits you have now and any you might add, such as for an electric shower, a new kitchen or an outdoor socket. We count the circuits during our visit and allow some spare space, so you can add to it later without replacing the board again.
It depends on the number of circuits, the type of unit and whether any faults or earthing problems need fixing first. We test your wiring before quoting, so the free quote reflects the real work and you're not surprised by extra costs on the day.
We explain what we've found, where it is and how serious it is. Some faults need fixing before the new unit can be fitted, because the RCDs would keep tripping. We give you a price for the repair and only carry it out with your agreement.
We replace consumer units in Coventry and the villages around it. Pick your area to see more.
Send us a photo of your current fuse box, and we'll arrange a visit and a free quote.